The Magnum Door / Window Sensor helps provide energy savings for an area by detecting when a door or window opens or closes. It is a wireless solar-powered sensor that can be used on its own to detect the open and closed status of entry doors or windows, or it can be paired with a Magnum occupancy sensor to accurately detect whenever someone enters or exits a room. The sensor is easy to install on door and window frames, and virtually anything indoors that opens and closes.
Sends wireless message to other devices whenever a door or window opens or closes
Harvests ambient solar energy to power the sensor and send wireless communication
Mounts easily on standard doors or windows
Works with motion sensors to track room occupancy and temperature control
Supplemental battery option for extreme low-light failover
Wireless Repeater which receives telegrams and re-sends them to enhance and increase the signal distance from the transmitter to the
receiver. Typically a repeater will be used when the sensor has been mounted too far from the receiver or there are obstacles between the
sensor and receiver which diminishes the signal.
Magnum offers the Pressac Wireless 3 Channel CT Clamp, designed to measure and report the AC current flowing in 3 separate channel's. Powered from any of the measured connectors, the measured current in all 3 channels is reported every 30 seconds.
Magnum offers the Pressac 1 Channel CT Clamp, designed to measure and report the AC current flowing in a single channel. Powered from the measure conductor, the measured current in the channel is reported every 30 seconds using the industry standard, wireless EnOcean protocol.
Single channel solar-powered sensor, with an intelligent transmission management, are used to measure the room temperature and transmit this information wirelessly. The external thermistor offers highly precise temperature readings covering a distance of up to 12 ft. The external thermistor is ideal for air duct temperature sensing.
Solar-powered sensors, with an intelligent transmission management, are used to measure the room temperature and room rH, and transmit this information wirelessly using the non-proprietary EnOcean wireless protocol.