Room Control Module (RPW)

PRODUCTS


Room Control Module (RPW)

Mx-RPW

Application

Solar-powered, self-learning room sensor with LCD and smart communication management for measuring room temperature, independent generation of utilization time profiles and their continuous dynamic adjustment/optimization and for wireless transmission of measured values. Occupancy button for manually changing the comfort mode or economy mode status. In combination with the Mx-D15 valve controller, the Mx-RPW room sensor constitutes a functional unit for easy room temperature control.
The following EnOcean Equipment Profiles (EEP) are supported: EEP D2-10-02

* * You can find information about the protocol description on the EnOcean Technology website http://www.enocean-alliance.org/en/enocean_standard/

HVAC Control

ALL HVAC CONTROL PRODUCTS

Smart Repeater
Smart Repeater
Mx-USR-RPT

Wireless Repeater which receives telegrams and re-sends them to enhance and increase the signal distance from the transmitter to the receiver. Typically a repeater will be used when the sensor has been mounted too far from the receiver or there are obstacles between the sensor and receiver which diminishes the signal.
cut sheet »
installation guide »
Remote Temp Sensor with Set Point
Remote Temp Sensor with Set Point
Mx-RTS1-SP

Single channel solar-powered sensor, with an intelligent transmission management, are used to measure the room temperature and transmit this information wirelessly. Dial provides set point control.
cut sheet »
installation guide »
Intelligent Valve Actuator
Intelligent Valve Actuator
Mx-D15

Radio controlled, battery-powered actuator for room temperature control. Additional control available by utilizing the Mx-RBW or Mx-RPW controllers.
cut sheet »
installation guide »
HVAC Setback Module
HVAC Setback Module
Mx-EHSM

The HVAC Setback Module is a simple way to save energy by switching HVAC units between normal and setback modes.
cut sheet »
installation guide »
Step Down Relay Board
Step Down Relay Board
Mx-MRB

Provides the electrical interface between the low voltage controls and the line voltage components of the HVAC system. It uses a 10 VA transformer to convert the line voltage to class 2 power.
cut sheet »
Thermostat Control Board
Thermostat Control Board
Mx-MTB

The MTB is a unit mounted HVAC controller. It accepts inputs from a variety of wired and wireless room monitoring components to form a complete room subsystem.
cut sheet »
installation guide »
Room Control Module
Room Control Module
Mx-RBW

Solar-powered room control module with LCD and controls, with smart communication management for measuring room temperature and additional wireless data.
cut sheet »
installation guide »
Room Control Module (RPW)
Room Control Module (RPW)
Mx-RPW

Solar-powered, self-learning room sensor with LCD and smart communication management for measuring room temperature with on-board occupancy sensor.
cut sheet »
installation guide »
Wireless Temp / rH Sensor
Wireless Temp / rH Sensor
Mx-RS2

Solar-powered sensors, with an intelligent transmission management, are used to measure the room temperature and room rH, and transmit this information wirelessly using the non-proprietary EnOcean wireless protocol.
cut sheet »
installation guide »
Remote Temp Sensor
Remote Temp Sensor
Mx-RTS1

Single channel solar-powered sensor, with an intelligent transmission management, are used to measure the room temperature and transmit this information wirelessly.
cut sheet »
installation guide »
Remote Temp Sensor (3 Channel)
Remote Temp Sensor (3 Channel)
Mx-RTS3

Three channel solar-powered sensor, with an intelligent transmission management, are used to measure the room temperature and transmit this information wirelessly.
cut sheet »
installation guide »
Remote Temperature Sensor With External Thermistor
Remote Temperature Sensor With External Thermistor
Mx-RTS1-EXT

Single channel solar-powered sensor, with an intelligent transmission management, are used to measure the room temperature and transmit this information wirelessly. The external thermistor offers highly precise temperature readings covering a distance of up to 12 ft. The external thermistor is ideal for air duct temperature sensing.
cut sheet »
installation guide »
Remote Temp / rH Sensor
Remote Temp / rH Sensor
Mx-RTHS1

Solar-powered sensor, with an intelligent transmission management, are used to measure the room temperature and room rH, and transmit this information wirelessly.
cut sheet »
installation guide »
Intelligent 24V Thermostat
Intelligent 24V Thermostat
Mx-TS1

The Magnum Thermostat uses wireless communication to provide quick and easy implementation of the energy-saving HVAC controls. Includes a customizable 4.3” LCD display.
cut sheet »
installation guide »