Single Channel Switch

PRODUCTS


Single Channel Switch

Mx-SW1

Basic Operation

The Mx-SW1 energy-harvesting Pushbutton generates the power for wireless telegrams itself when the button is pressed, therefor there is no connecting wire and no standby loss.

Wireless pushbuttons with one rocker can transmit two signals: press rocker up and press rocker down.

Wireless pushbuttons with double rocker can transmit four evaluable signals: press two rockers up or down.

Frequency: 315 MHz / 868 MHz / 902 MHz / 928 MHz.

Dimensions (approximate)

  • Width: 2.5 in.
  • Height: 5 in.
  • Thickness: 0.625 in.

Lighting Control

ALL LIGHTING CONTROL PRODUCTS

Wireless Motion / Lux Sensor
Wireless Motion / Lux Sensor
Mx-ML2

The Mx-ML2 is a wireless, self powered, passive infrared sensor that ensures reliable detection of occupant presence, and is ideally suited for occupancy-based lighting control.
cut sheet »
installation guide »
Wireless Occupancy Sensor
Wireless Occupancy Sensor
Mx-EOSW (wall mounted)

The wall-mounted occupancy sensor saves energy and adds convenience by accurately detecting when an area is occupied or vacant.
cut sheet »
installation guide »
Wireless Occupancy Sensor
Wireless Occupancy Sensor
Mx-EOSC (ceiling mounted)

The ceiling-mounted occupancy sensor saves energy and adds convenience by accurately detecting when an area is occupied or vacant.
cut sheet »
installation guide »
0-10V Lighting Control Module (metering & temp)(LM)
0-10V Lighting Control Module (metering & temp)(LM)
Mx-USR-LM

The Mx-USR-LM offers bi-directional, ON/OFF and 0-10V dimming control when combined with a wireless light switch or automatic shut-off when combined with a wireless occupancy sensor.
cut sheet »
1 or 2 Channel Switch
1 or 2 Channel Switch
MZ-ESRP / MZ-EDRP

Wireless (via ZigBee transmitter module) and battery-free, one or two channel light switch. A clean contemporary design makes them an attractive addition to any decor.
cut sheet »
installation guide »
1 or 2 Channel Switch
1 or 2 Channel Switch
MZ-SW1 / MZ-SW2

Wireless (via ZigBee transmitter module) and battery-free, one or two channel light switch. A clean contemporary design makes them an attractive addition to any decor.
cut sheet »
installation guide »
1 or 2 Channel Switch
1 or 2 Channel Switch
MZ-ASW1 / MZ-ASW2

The light switch is a battery-free wireless transmitter (via ZigBee transmitter module) that communicates with a wide variety of receivers. Multiple color / finish options available.
cut sheet »
installation guide »
1 or 2 Channel Switch
1 or 2 Channel Switch
Mx-ASW1 / Mx-ASW2

The light switch is a battery-free wireless transmitter that communicates with a wide variety of receivers. Multiple color / finish options available.
cut sheet »
installation guide »
1 or 2 Channel Switch
1 or 2 Channel Switch
Mx-EDRP / Mx-ESRP

Wireless and battery-free one or two channel light switch. A clean contemporary design makes them an attractive addition to any decor.
cut sheet »
installation guide »
Integrated Light Switch
Integrated Light Switch
Mx-ILS2

This integrated light switch fits in a standard single gange wall box and can work in conjunction with Magnum wireless control products.
cut sheet »
installation guide »
Outdoor Lighting Node (LBKO10V)
Outdoor Lighting Node (LBKO10V)
Mx-OPUS-LBKO10V (low bay)

When the device is connected to 0-10V dim-to-off drivers, it enables any lighting manufacturer to deliver simple, fully connected fixtures.
cut sheet »
Outdoor Lighting Node (LBKOD)
Outdoor Lighting Node (LBKOD)
Mx-OPUS-LBKOD (low bay)

Outdoor, in fixture DALI lighting controller with digital PIR and ambient light sensing for daylight harvesting applications as well as occupancy detection.
cut sheet »
In-Fixture Lighting Node (CHML10V)
In-Fixture Lighting Node (CHML10V)
Mx-OPUS-CHML10V (high bay)

When connected to 0-10V dim-to-off drivers, enables any lighting manufacturer to deliver simple, fully connected fixtures. The small, cylindrical form factor includes a PIR / Lux sensor.
cut sheet »
In-Fixture Lighting Node (CHMLD)
In-Fixture Lighting Node (CHMLD)
Mx-OPUS-CHMLD (high bay)

When connected to a Philips Advance Xitanium SR LED driver or any compatible DALI driver, enables any lighting. Manufacturer to deliver simple, fully connected fixtures.
cut sheet »
In-Fixture Lighting Node (CLML10V)
In-Fixture Lighting Node (CLML10V)
Mx-OPUS-CLML10V (low bay)

When connected to 0-10V dim-to-off drivers, enables any lighting manufacturer to deliver simple, fully connected fixtures. The small, cylindrical form factor includes a PIR / Lux sensor.
cut sheet »
In-Fixture Lighting Node (CLMLD)
In-Fixture Lighting Node (CLMLD)
Mx-OPUS-CLMLD (low bay)

When connected to a Philips Advance Xitanium SR LED driver or any compatible DALI driver, enables any lighting manufacturer to deliver simple, fully connected fixtures.
cut sheet »
In-Fixture Lighting Node (10V12)
In-Fixture Lighting Node (10V12)
Mx-OPUS-10V12

The Mx-OPUS-10V12 is compatible with 0-10V, dim-to-off LED drivers. The device is powered through available low voltage from the driver or an available 12-15VDC source.
cut sheet »
installation guide »
In-Fixture Lighting Node (DR10V)
In-Fixture Lighting Node (DR10V)
Mx-OPUS-DR10V

Compatible with 0-10V, dim-to-off LED drivers. The device is powered through available low voltage from the driver or an available 12-36 VDC, 12-24 VAC source near the fixture level.
cut sheet »
installation guide »
In-Fixture Lighting Node (DRD)
In-Fixture Lighting Node (DRD)
Mx-OPUS-DRD

The Mx-OPUS-DRD provides for bi-directional, fixture level wireless DALI (digital addressable lighting interface) lighting control integration.
cut sheet »
installation guide »
In-Fixture Lighting Node (MLDHB)
In-Fixture Lighting Node (MLDHB)
Mx-OPUS-MLDHB

Connecting the device to a Philips Xitanium SR Driver or a DALI driver, enables any lighting manufacturer to deliver fully connected fixtures. The small form factor includes a PIR / Lux sensor.
cut sheet »
In-Fixture Lighting Node (DRDHV)
In-Fixture Lighting Node (DRDHV)
Mx-OPUS-DRDHV

The Mx-OPUS-DRDHV provides for bi-directional, fixture level wireless DALI (digital addressable lighting interface) lighting control integration.
cut sheet »
In-Fixture Lighting Node (DRDLV)
In-Fixture Lighting Node (DRDLV)
Mx-OPUS-DRDLV

The Mx-OPUS-DRDLV provides for bi-directional, fixture level wireless DALI (digital addressable lighting interface) lighting control integration.
cut sheet »
Outdoor Lighting Node (HBKO10V)
Outdoor Lighting Node (HBKO10V)
Mx-OPUS-HBKO10V

When the device is connected to 0-10V dim-to-off drivers, it enables any lighting manufacturer to deliver simple, fully connected fixtures.
cut sheet »
Outdoor Lighting Node (HBKOD)
Outdoor Lighting Node (HBKOD)
Mx-OPUS-HBKOD

Outdoor, in fixture DALI lighting controller with digital PIR and ambient light sensing for daylight harvesting applications as well as occupancy detection.
cut sheet »
Wired Motion / Lux Sensor (HPML)
Wired Motion / Lux Sensor (HPML)
Mx-OPUS-HPML (high bay)

Wired motion / lux sensor that works in tandem with Magnum’s OPUS-DRD, DR10V, DRDHV and DRDLV to add additional control to your fixture.
cut sheet »
Wired Motion / Lux Sensor (LPML)
Wired Motion / Lux Sensor (LPML)
Mx-OPUS-LPML (low bay)

Wired motion / lux sensor that works in tandem with Magnum’s OPUS-DRD, DR10V, DRDHV and DRDLV to add additional control to your fixture.
cut sheet »
In-Fixture Lighting Node (ML10V)
In-Fixture Lighting Node (ML10V)
Mx-OPUS-ML10V (low bay)

Connecting the device to 0-10V dim-to-off drivers, enables any lighting manufacturer to deliver simple, fully connected fixtures. The small, sleek form factor includes a PIR / Lux sensor.
cut sheet »
installation guide »
In-Fixture Lighting Node (MLD)
In-Fixture Lighting Node (MLD)
Mx-OPUS-MLD (low bay)

Connecting the device to a Philips Xitanium SR Driver or a DALI driver, enables any lighting manufacturer to deliver fully connected fixtures. The small form factor includes a PIR / Lux sensor.
cut sheet »
installation guide »
In-Fixture Lighting Node (MLDE)
In-Fixture Lighting Node (MLDE)
Mx-OPUS-MLDE (highbay)

Connecting the device to a Philips Xitanium SR Driver or a DALI driver, enables any lighting manufacturer to deliver fully connected fixtures. The small form factor includes a PIR / Lux sensor.
cut sheet »
installation guide »
Single Channel Switch
Single Channel Switch
Mx-SW1

The energy-harvesting pushbutton generates the power for wireless telegrams when the button is pressed, therefore there is no connecting wire and no standby loss.
cut sheet »
installation guide »
Two Channel Switch
Two Channel Switch
Mx-SW2

The energy-harvesting pushbuttons generates the power for wireless telegrams when the button is pressed, therefore there is no connecting wire and no standby loss.
cut sheet »
installation guide »
1 Channel Lighting Relay (USR-L3)
1 Channel Lighting Relay (USR-L3)
Mx-USR-L3

The Mx-USR-L3 offers bi-directional, ON/OFF and 0-10V dimming control when combined with a wireless light switch or automatic shut-off when combined with a wireless occ sensor.
cut sheet »
installation guide »
1 Channel Lighting Relay (PWM)
1 Channel Lighting Relay (PWM)
Mx-USR-L1PWM

The Mx-USR-L1PWM offers bi-directional, ON/OFF and 0-10V dimming control when combined with a wireless light switch or automatic shut-off when combined with a wireless occ sensor.
cut sheet »
2 Channel Lighting Relay (UTR-L3)
2 Channel Lighting Relay (UTR-L3)
Mx-UTR-L3

The Mx-UTR-L3 offers bi-directional, ON/OFF and 0-10V dimming control when combined with a wireless light switch or automatic shut-off when combined with a wireless occ sensor.
cut sheet »