PRODUCTS

Smart Repeater
Mx-USR-RPT

Wireless Repeater which receives telegrams and re-sends them to enhance and increase the signal distance from the transmitter to the receiver. Typically a repeater will be used when the sensor has been mounted too far from the receiver or there are obstacles between the sensor and receiver which diminishes the signal.

Pressac 1 Channel CT Clamp
M9-SCCT

Magnum offers the Pressac 1 Channel CT Clamp, designed to measure and report the AC current flowing in a single channel. Powered from the measure conductor, the measured current in the channel is reported every 30 seconds using the industry standard, wireless EnOcean protocol.

Window / Door Sensor
Mx-EDWS

The Magnum Door / Window Sensor helps provide energy savings for an area by detecting when a door or window opens or closes.

Wireless Occupancy Sensor (EOSC)
Mx-EOSC (ceiling mounted)

The ceiling-mounted occupancy sensor saves energy and adds convenience by accurately detecting when an area is occupied or vacant.

Wireless Occupancy Sensor (EOSW)
Mx-EOSW (wall mounted)

The wall-mounted occupancy sensor saves energy and adds convenience by accurately detecting when an area is occupied or vacant.

Window / Door Sensor (MRC1)
Mx-MRC1

The Magnum Door / Window Sensor helps provide energy savings for an area by detecting when a door or window opens or closes.

Sensor Control Board (12)
Mx-RSB-12 (12 channel)

The Magnum Temperature / Humidity / Pressure Sensor Control Board includes 2 digital inputs, 3 digital outputs and 1 analog output.

Remote Temp Sensor
Mx-RTS1

Single channel solar-powered sensor, with an intelligent transmission management, are used to measure the room temperature and transmit this information wirelessly.

Remote Temp Sensor with Set Point Control
Mx-RTS1-SP

Single channel solar-powered sensor, with an intelligent transmission management, are used to measure the room temperature and transmit this information wirelessly. Dial provides set point control.

Remote Temperature Sensor With External Thermistor
Mx-RTS1-EXT

Single channel solar-powered sensor, with an intelligent transmission management, are used to measure the room temperature and transmit this information wirelessly. The external thermistor offers highly precise temperature readings covering a distance of up to 12 ft. The external thermistor is ideal for air duct temperature sensing.

Wireless Temp / rH Sensor
Mx-RS2

Solar-powered sensors, with an intelligent transmission management, are used to measure the room temperature and room rH, and transmit this information wirelessly using the non-proprietary EnOcean wireless protocol.