Intelligent 24V Thermostat

PRODUCTS


Intelligent 24V Thermostat

Mx-TS1

Description

The Magnum Thermostat uses wireless communication to provide quick and easy implementation of the energy-saving HVAC controls. When the thermostat receives an “occupied” signal from any of Magnum’s wireless switch or sensor, the user immediately gains full control of the HVAC settings. When the thermostat receives an “unoccupied” signal, it sets the room back to the preset unoccupied temperature. When used with Magnum’s Gateway, the thermostat can also be connected to LON and BACNet HVAC control systems.

Applications

  • Hotels & Resorts
  • Private Offices
  • Colleges & Universities
  • Retrofits
  • New Construction
  • Conference Rooms
  • Executive Offices
  • Lighted Hallways
  • Perimeter Zones
  • Cruise Ships
  • Daylight Harvesting
  • Classrooms
  • Restrooms
  • Daycare Facilities

HVAC Control

ALL HVAC CONTROL PRODUCTS

Smart Repeater
Smart Repeater
Mx-USR-RPT

Wireless Repeater which receives telegrams and re-sends them to enhance and increase the signal distance from the transmitter to the receiver. Typically a repeater will be used when the sensor has been mounted too far from the receiver or there are obstacles between the sensor and receiver which diminishes the signal.
cut sheet »
installation guide »
Remote Temp Sensor with Set Point
Remote Temp Sensor with Set Point
Mx-RTS1-SP

Single channel solar-powered sensor, with an intelligent transmission management, are used to measure the room temperature and transmit this information wirelessly. Dial provides set point control.
cut sheet »
installation guide »
Intelligent Valve Actuator
Intelligent Valve Actuator
Mx-D15

Radio controlled, battery-powered actuator for room temperature control. Additional control available by utilizing the Mx-RBW or Mx-RPW controllers.
cut sheet »
installation guide »
HVAC Setback Module
HVAC Setback Module
Mx-EHSM

The HVAC Setback Module is a simple way to save energy by switching HVAC units between normal and setback modes.
cut sheet »
installation guide »
Step Down Relay Board
Step Down Relay Board
Mx-MRB

Provides the electrical interface between the low voltage controls and the line voltage components of the HVAC system. It uses a 10 VA transformer to convert the line voltage to class 2 power.
cut sheet »
Thermostat Control Board
Thermostat Control Board
Mx-MTB

The MTB is a unit mounted HVAC controller. It accepts inputs from a variety of wired and wireless room monitoring components to form a complete room subsystem.
cut sheet »
installation guide »
Room Control Module
Room Control Module
Mx-RBW

Solar-powered room control module with LCD and controls, with smart communication management for measuring room temperature and additional wireless data.
cut sheet »
installation guide »
Room Control Module (RPW)
Room Control Module (RPW)
Mx-RPW

Solar-powered, self-learning room sensor with LCD and smart communication management for measuring room temperature with on-board occupancy sensor.
cut sheet »
installation guide »
Wireless Temp / rH Sensor
Wireless Temp / rH Sensor
Mx-RS2

Solar-powered sensors, with an intelligent transmission management, are used to measure the room temperature and room rH, and transmit this information wirelessly using the non-proprietary EnOcean wireless protocol.
cut sheet »
installation guide »
Remote Temp Sensor
Remote Temp Sensor
Mx-RTS1

Single channel solar-powered sensor, with an intelligent transmission management, are used to measure the room temperature and transmit this information wirelessly.
cut sheet »
installation guide »
Remote Temp Sensor (3 Channel)
Remote Temp Sensor (3 Channel)
Mx-RTS3

Three channel solar-powered sensor, with an intelligent transmission management, are used to measure the room temperature and transmit this information wirelessly.
cut sheet »
installation guide »
Remote Temperature Sensor With External Thermistor
Remote Temperature Sensor With External Thermistor
Mx-RTS1-EXT

Single channel solar-powered sensor, with an intelligent transmission management, are used to measure the room temperature and transmit this information wirelessly. The external thermistor offers highly precise temperature readings covering a distance of up to 12 ft. The external thermistor is ideal for air duct temperature sensing.
cut sheet »
installation guide »
Remote Temp / rH Sensor
Remote Temp / rH Sensor
Mx-RTHS1

Solar-powered sensor, with an intelligent transmission management, are used to measure the room temperature and room rH, and transmit this information wirelessly.
cut sheet »
installation guide »
Intelligent 24V Thermostat
Intelligent 24V Thermostat
Mx-TS1

The Magnum Thermostat uses wireless communication to provide quick and easy implementation of the energy-saving HVAC controls. Includes a customizable 4.3” LCD display.
cut sheet »
installation guide »