Integrated Light Switch

PRODUCTS


Integrated Light Switch

Mx-ILS2

Description

The Magnum Energy line of Wall Switch Receivers work in conjunction with EnOcean-enabled Self-Powered Wireless Lighting Control Products to provide and optimal solution for the retrofit lighting needs. These wireless products combine Magnum’s switching technology with self-powered and wireless technologies, developed and licensed from EnOcean. The Wall Switch Receiver can be installed in place of traditional single-pole wall switches and fits in a standard single-gang wall box. No Additional wiring is required.

These components are compatible with incandescent, fluorescent, and low-voltage lighting. The EnOcean Receiver responds to signals from the EnOcean transmitters switching the relay (controlling the load) on or off. The Receiver features a single push ON/OFF (return-to-neutral) manual-override switch that can be used to toggle the ON/OFF status of the light load.

  • RF Wall Switch Receiver fits in a standard single-gang wall box.
  • No new wires required, product utilizes existing A/C and Load Wiring.
  • Compatible with incandescent, fluorescent and low-voltage lighting.
  • Simple, fast installation, replace existing light switch and pair/learn a self powered transmitter switch or sensor in under 10 minutes.
  • Decorator style wall switch utilizes the ON/OFF return-to-neutral design.
  • Neutral and non-neutral Wall Switch Receiver models are available.

Mx-ILS2

Lighting Control

ALL LIGHTING CONTROL PRODUCTS

Wireless Motion / Lux Sensor
Wireless Motion / Lux Sensor
Mx-ML2

The Mx-ML2 is a wireless, self powered, passive infrared sensor that ensures reliable detection of occupant presence, and is ideally suited for occupancy-based lighting control.
cut sheet »
installation guide »
Wireless Occupancy Sensor
Wireless Occupancy Sensor
Mx-EOSW (wall mounted)

The wall-mounted occupancy sensor saves energy and adds convenience by accurately detecting when an area is occupied or vacant.
cut sheet »
installation guide »
Wireless Occupancy Sensor
Wireless Occupancy Sensor
Mx-EOSC (ceiling mounted)

The ceiling-mounted occupancy sensor saves energy and adds convenience by accurately detecting when an area is occupied or vacant.
cut sheet »
installation guide »
0-10V Lighting Control Module (metering & temp)(LM)
0-10V Lighting Control Module (metering & temp)(LM)
Mx-USR-LM

The Mx-USR-LM offers bi-directional, ON/OFF and 0-10V dimming control when combined with a wireless light switch or automatic shut-off when combined with a wireless occupancy sensor.
cut sheet »
1 or 2 Channel Switch
1 or 2 Channel Switch
MZ-ESRP / MZ-EDRP

Wireless (via ZigBee transmitter module) and battery-free, one or two channel light switch. A clean contemporary design makes them an attractive addition to any decor.
cut sheet »
installation guide »
1 or 2 Channel Switch
1 or 2 Channel Switch
MZ-SW1 / MZ-SW2

Wireless (via ZigBee transmitter module) and battery-free, one or two channel light switch. A clean contemporary design makes them an attractive addition to any decor.
cut sheet »
installation guide »
1 or 2 Channel Switch
1 or 2 Channel Switch
MZ-ASW1 / MZ-ASW2

The light switch is a battery-free wireless transmitter (via ZigBee transmitter module) that communicates with a wide variety of receivers. Multiple color / finish options available.
cut sheet »
installation guide »
1 or 2 Channel Switch
1 or 2 Channel Switch
Mx-ASW1 / Mx-ASW2

The light switch is a battery-free wireless transmitter that communicates with a wide variety of receivers. Multiple color / finish options available.
cut sheet »
installation guide »
1 or 2 Channel Switch
1 or 2 Channel Switch
Mx-EDRP / Mx-ESRP

Wireless and battery-free one or two channel light switch. A clean contemporary design makes them an attractive addition to any decor.
cut sheet »
installation guide »
Integrated Light Switch
Integrated Light Switch
Mx-ILS2

This integrated light switch fits in a standard single gange wall box and can work in conjunction with Magnum wireless control products.
cut sheet »
installation guide »
Outdoor Lighting Node (LBKO10V)
Outdoor Lighting Node (LBKO10V)
Mx-OPUS-LBKO10V (low bay)

When the device is connected to 0-10V dim-to-off drivers, it enables any lighting manufacturer to deliver simple, fully connected fixtures.
cut sheet »
Outdoor Lighting Node (LBKOD)
Outdoor Lighting Node (LBKOD)
Mx-OPUS-LBKOD (low bay)

Outdoor, in fixture DALI lighting controller with digital PIR and ambient light sensing for daylight harvesting applications as well as occupancy detection.
cut sheet »
In-Fixture Lighting Node (CHML10V)
In-Fixture Lighting Node (CHML10V)
Mx-OPUS-CHML10V (high bay)

When connected to 0-10V dim-to-off drivers, enables any lighting manufacturer to deliver simple, fully connected fixtures. The small, cylindrical form factor includes a PIR / Lux sensor.
cut sheet »
In-Fixture Lighting Node (CHMLD)
In-Fixture Lighting Node (CHMLD)
Mx-OPUS-CHMLD (high bay)

When connected to a Philips Advance Xitanium SR LED driver or any compatible DALI driver, enables any lighting. Manufacturer to deliver simple, fully connected fixtures.
cut sheet »
In-Fixture Lighting Node (CLML10V)
In-Fixture Lighting Node (CLML10V)
Mx-OPUS-CLML10V (low bay)

When connected to 0-10V dim-to-off drivers, enables any lighting manufacturer to deliver simple, fully connected fixtures. The small, cylindrical form factor includes a PIR / Lux sensor.
cut sheet »
In-Fixture Lighting Node (CLMLD)
In-Fixture Lighting Node (CLMLD)
Mx-OPUS-CLMLD (low bay)

When connected to a Philips Advance Xitanium SR LED driver or any compatible DALI driver, enables any lighting manufacturer to deliver simple, fully connected fixtures.
cut sheet »
In-Fixture Lighting Node (10V12)
In-Fixture Lighting Node (10V12)
Mx-OPUS-10V12

The Mx-OPUS-10V12 is compatible with 0-10V, dim-to-off LED drivers. The device is powered through available low voltage from the driver or an available 12-15VDC source.
cut sheet »
installation guide »
In-Fixture Lighting Node (DR10V)
In-Fixture Lighting Node (DR10V)
Mx-OPUS-DR10V

Compatible with 0-10V, dim-to-off LED drivers. The device is powered through available low voltage from the driver or an available 12-36 VDC, 12-24 VAC source near the fixture level.
cut sheet »
installation guide »
In-Fixture Lighting Node (DRD)
In-Fixture Lighting Node (DRD)
Mx-OPUS-DRD

The Mx-OPUS-DRD provides for bi-directional, fixture level wireless DALI (digital addressable lighting interface) lighting control integration.
cut sheet »
installation guide »
In-Fixture Lighting Node (MLDHB)
In-Fixture Lighting Node (MLDHB)
Mx-OPUS-MLDHB

Connecting the device to a Philips Xitanium SR Driver or a DALI driver, enables any lighting manufacturer to deliver fully connected fixtures. The small form factor includes a PIR / Lux sensor.
cut sheet »
In-Fixture Lighting Node (DRDHV)
In-Fixture Lighting Node (DRDHV)
Mx-OPUS-DRDHV

The Mx-OPUS-DRDHV provides for bi-directional, fixture level wireless DALI (digital addressable lighting interface) lighting control integration.
cut sheet »
In-Fixture Lighting Node (DRDLV)
In-Fixture Lighting Node (DRDLV)
Mx-OPUS-DRDLV

The Mx-OPUS-DRDLV provides for bi-directional, fixture level wireless DALI (digital addressable lighting interface) lighting control integration.
cut sheet »
Outdoor Lighting Node (HBKO10V)
Outdoor Lighting Node (HBKO10V)
Mx-OPUS-HBKO10V

When the device is connected to 0-10V dim-to-off drivers, it enables any lighting manufacturer to deliver simple, fully connected fixtures.
cut sheet »
Outdoor Lighting Node (HBKOD)
Outdoor Lighting Node (HBKOD)
Mx-OPUS-HBKOD

Outdoor, in fixture DALI lighting controller with digital PIR and ambient light sensing for daylight harvesting applications as well as occupancy detection.
cut sheet »
Wired Motion / Lux Sensor (HPML)
Wired Motion / Lux Sensor (HPML)
Mx-OPUS-HPML (high bay)

Wired motion / lux sensor that works in tandem with Magnum’s OPUS-DRD, DR10V, DRDHV and DRDLV to add additional control to your fixture.
cut sheet »
Wired Motion / Lux Sensor (LPML)
Wired Motion / Lux Sensor (LPML)
Mx-OPUS-LPML (low bay)

Wired motion / lux sensor that works in tandem with Magnum’s OPUS-DRD, DR10V, DRDHV and DRDLV to add additional control to your fixture.
cut sheet »
In-Fixture Lighting Node (ML10V)
In-Fixture Lighting Node (ML10V)
Mx-OPUS-ML10V (low bay)

Connecting the device to 0-10V dim-to-off drivers, enables any lighting manufacturer to deliver simple, fully connected fixtures. The small, sleek form factor includes a PIR / Lux sensor.
cut sheet »
installation guide »
In-Fixture Lighting Node (MLD)
In-Fixture Lighting Node (MLD)
Mx-OPUS-MLD (low bay)

Connecting the device to a Philips Xitanium SR Driver or a DALI driver, enables any lighting manufacturer to deliver fully connected fixtures. The small form factor includes a PIR / Lux sensor.
cut sheet »
installation guide »
In-Fixture Lighting Node (MLDE)
In-Fixture Lighting Node (MLDE)
Mx-OPUS-MLDE (highbay)

Connecting the device to a Philips Xitanium SR Driver or a DALI driver, enables any lighting manufacturer to deliver fully connected fixtures. The small form factor includes a PIR / Lux sensor.
cut sheet »
installation guide »
Single Channel Switch
Single Channel Switch
Mx-SW1

The energy-harvesting pushbutton generates the power for wireless telegrams when the button is pressed, therefore there is no connecting wire and no standby loss.
cut sheet »
installation guide »
Two Channel Switch
Two Channel Switch
Mx-SW2

The energy-harvesting pushbuttons generates the power for wireless telegrams when the button is pressed, therefore there is no connecting wire and no standby loss.
cut sheet »
installation guide »
1 Channel Lighting Relay (USR-L3)
1 Channel Lighting Relay (USR-L3)
Mx-USR-L3

The Mx-USR-L3 offers bi-directional, ON/OFF and 0-10V dimming control when combined with a wireless light switch or automatic shut-off when combined with a wireless occ sensor.
cut sheet »
installation guide »
1 Channel Lighting Relay (PWM)
1 Channel Lighting Relay (PWM)
Mx-USR-L1PWM

The Mx-USR-L1PWM offers bi-directional, ON/OFF and 0-10V dimming control when combined with a wireless light switch or automatic shut-off when combined with a wireless occ sensor.
cut sheet »
2 Channel Lighting Relay (UTR-L3)
2 Channel Lighting Relay (UTR-L3)
Mx-UTR-L3

The Mx-UTR-L3 offers bi-directional, ON/OFF and 0-10V dimming control when combined with a wireless light switch or automatic shut-off when combined with a wireless occ sensor.
cut sheet »