Smart Repeater
Mx-USR-RPT
Wireless Repeater which receives telegrams and re-sends them to enhance and increase the signal distance from the transmitter to the
receiver. Typically a repeater will be used when the sensor has been mounted too far from the receiver or there are obstacles between the
sensor and receiver which diminishes the signal.
Automatic Load Control Relay
Mx-ALCR
The Magnum MX-ALCR is a UL 924 listed emergency lighting control device. This device is designed to ensure a “lights on state” during a power outage. The MX-ALCR senses when a power outage occurs and switches on the connected emergency lighting load to full brightness, bypassing any normal lighting switches and dimmer controls.
Wireless Motion / Lux Sensor
Mx-ML2
The Mx-ML2 is a wireless, self powered, passive infrared sensor that ensures reliable detection of occupant presence, and is ideally suited for occupancy-based lighting control.
Wired Motion / Lux Sensor (HPML)
Mx-OPUS-HPML (high bay)
Wired motion / lux sensor that works in tandem with Magnum’s OPUS-DRD, DR10V, DRDHV and DRDLV to add additional control to your fixture.
In-Fixture Lighting Node (ML10V)
Mx-OPUS-ML10V (low bay)
Connecting the device to 0-10V dim-to-off drivers, enables any lighting manufacturer to deliver simple, fully connected fixtures. The small, sleek form factor includes a PIR / Lux sensor.
In-Fixture Lighting Node (ML10VHB)
Mx-OPUS-ML10VHB (high bay)
Connecting the device to 0-10V dim-to-off drivers, enables any lighting manufacturer to deliver simple, fully connected fixtures. The small, sleek form factor includes a PIR / Lux sensor.
In-Fixture Lighting Node (MLD)
Mx-OPUS-MLD (low bay)
Connecting the device to a Philips Xitanium SR Driver or a DALI driver, enables any lighting manufacturer to deliver fully connected fixtures. The small form factor includes a PIR / Lux sensor.
In-Fixture Lighting Node (MLDHB)
Mx-OPUS-MLDHB
Connecting the device to a Philips Xitanium SR Driver or a DALI driver, enables any lighting manufacturer to deliver fully connected fixtures. The small form factor includes a PIR / Lux sensor.
In-Fixture Lighting Node (MLDE)
Mx-OPUS-MLDE (highbay)
Connecting the device to a Philips Xitanium SR Driver or a DALI driver, enables any lighting manufacturer to deliver fully connected fixtures. The small form factor includes a PIR / Lux sensor.
PWM LED Dimming Module
Mx-OPUS-PWMLV
The Magnum Energy Solution’s PWM LED Dimming Control Module, through the use of thousands of PWM dimming steps, creates what is perceived by the natural eye as a single continuous dim, even at extremely low light levels.
1 Channel Lighting Relay (USR-L3)
Mx-USR-L3
The Mx-USR-L3 offers bi-directional, ON/OFF and 0-10V dimming control when combined with a wireless light switch or automatic shut-off when combined with a wireless occ sensor.
2 Channel Lighting Relay (UTR-L3)
Mx-UTR-L3
The Mx-UTR-L3 offers bi-directional, ON/OFF and 0-10V dimming control when combined with a wireless light switch or automatic shut-off when combined with a wireless occ sensor.
