The Magnum HVAC Setback Module is a simple way to save energy by switching HVAC units between normal and setback modes. It is low voltage, mounts easily in a typical HVAC enclosure, and communicates wirelessly with Magnum occupancy detection and lighting control products.
Switches HVAC to setback mode to save energy
Powered by HVAC via standard 24VAC connection
Receives wireless messages from Magnum devices to determine room occupancy
Controls setback range by built-in temperature sensor
Provides simple input signal by dry contact to compatible HVAC systems
Concealed easily within HVAC enclosure
Sends wireless messages to other controlled devices; conﬁgurable transceiver
Wireless Repeater which receives telegrams and re-sends them to enhance and increase the signal distance from the transmitter to the
receiver. Typically a repeater will be used when the sensor has been mounted too far from the receiver or there are obstacles between the
sensor and receiver which diminishes the signal.
Solar-powered sensors, with an intelligent transmission management, are used to measure the room temperature and room rH, and transmit this information wirelessly using the non-proprietary EnOcean wireless protocol.
Single channel solar-powered sensor, with an intelligent transmission management, are used to measure the room temperature and transmit this information wirelessly. The external thermistor offers highly precise temperature readings covering a distance of up to 12 ft. The external thermistor is ideal for air duct temperature sensing.