Wireless Access Point

PRODUCTS


Wireless Access Point

Mx-AP3

Wireless LAN Access Point with ETHERNET interface for use with EnOcean 868 MHz or 902 MHz wireless devices and the MES Venergy UI software.

Part Numbers (Frequency Dependent) M9-AP3 (902 MHz – North America)

M8-AP3 (868 MHz – Europe and China)

Processor AM3358 1GHz ARM® Cortex-A8 Processor
Onboard Flash 4GB
Accelerator NEON Floating-Point
Microcontroller 2x RU 32-bit
RAM 1 GB
Cache 256KB
Dimensions Length: 5.10” (129.54 mm)

Width: 5.05” (128.27 mm)

Height: 1.24” (31.496 mm)

Infrastructure

ALL INFRASTRUCTURE PRODUCTS

Smart Repeater
Smart Repeater
Mx-USR-RPT

Wireless Repeater which receives telegrams and re-sends them to enhance and increase the signal distance from the transmitter to the receiver. Typically a repeater will be used when the sensor has been mounted too far from the receiver or there are obstacles between the sensor and receiver which diminishes the signal.
cut sheet »
installation guide »
Wireless Access Point
Wireless Access Point
Mx-AP3

Wireless LAN Access Point with ETHERNET interface for use with EnOcean wireless devices and the MES Venergy UI software.
cut sheet »
BACnet IP Gateway
BACnet IP Gateway
Mx-EBOX3.0

The EBOX 3.0 integrates EnOcean wireless solutions to wired building automation systems that utilize the BACnet building automation protocol.
cut sheet »
installation guide »
BACnet IP Gateway (WiFi Capability)
BACnet IP Gateway (WiFi Capability)
Mx-EBOX3.0-WiFi

The EBOX 3.0-WiFi integrates EnOcean wireless solutions to wired building automation systems that utilize the BACnet building automation protocol. (WiFi Capability)
cut sheet »
installation guide »
VBOX Pro
VBOX Pro
Mx-VBOX-Pro

Magnum’s Mx-VBOX-PRO is a microcomputer that is installed with a license for VenergyUI. This software program allows the user to remotely monitor and control devices through a user friendly GUI. The Mx-VBOX-PRO also allows users to easily connect mobile devices to demonstrate the ability to control lighting with their smart phone or tablet. The Mx-VBOX-PRO is for applications where both local control and software capabilities are of interest.
cut sheet »